I need a solution
Hi community,
can someone explain this tpautoconf -report_disc output:
These are two libraries with 10 drives each. TLD(0) TLD(1)
Server1:
=========== Missing Device or no local control path (Robot) ===========
Defined as robotic TLD(0)
Inquiry = "ADIC Scalar i2000 617Q"
Serial Number = ADIC273100566_LL0
Robot Control Host = control host TLD(0)
Drive = 1, Drive Name = Drive000, Serial Number = F002566001
Hosts configured for this device:
Host = Server1
=========== Missing Device or no local control path (Robot) ===========
Defined as robotic TLD(1)
Inquiry = "QUANTUM Scalar i6000 617Q"
Serial Number = QUANTUM273100535_LL0
Robot Path = {2,0,11,1}
Robot Control Host = control host TLD(1)
Drive = 2, Drive Name = Drive006, Serial Number = F002547007
Hosts configured for this device:
Host = Server1
Server2
=========== Missing Device or no local control path (Robot) ===========
Defined as robotic TLD(0)
Inquiry = "ADIC Scalar i2000 617Q"
Serial Number = ADIC273100566_LL0
Robot Control Host = control host TLD(0)
Drive = 10, Drive Name = Drive010, Serial Number = F002566037
Hosts configured for this device:
Host = Server2
=========== Missing Device or no local control path (Robot) ===========
Defined as robotic TLD(1)
Inquiry = "QUANTUM Scalar i6000 617Q"
Serial Number = QUANTUM273100535_LL0
Robot Path = {2,0,11,1}
Robot Control Host = control host TLD(1)
Drive = 4, Drive Name = Drive008, Serial Number = F002547013
Hosts configured for this device:
Host = Server2
That the control path is missing is ok, since none of these servers is the robotic control host. The robotic is controlled throught the FC connection from drive1, this drive is zoned to the servers, so I assume thats why the robotic control is visible on all SSO media servers,
What I don't get is:
- Why is the line robot control host missing on server2 TLD(0)
- What does this line mean: For example on Server2 TLD(1)
Drive = 4, Drive Name = Drive008, Serial Number = F002547013
Hosts configured for this device:
Host = Server2
Why is Drive4 mentioned in that line?
Another example from server1 TLD(0) as you can see above.
Drive = 1, Drive Name = Drive000, Serial Number = F002566001
Hosts configured for this device:
Host = Server1
Thanks in advance!
Volker