How to connect and backup data from SAN to tape library? Please help

January 24, 2013, 9:27 am

≫ Next: These files were not restored (Restore failed with error, or file/directory specified but not found in backup):

≪ Previous: VMLevel Exchange DAG Backups

I need a solution

Hello everyone,

Usually I scheduled all of the data from our server to go to our IBM tape backup library. As of now, my manager asked me to bring the data to SAN and then back them up to tape library so for that reason we are going to have two backups.

Here are my uestions for this senario:

1) I guess I have to create LUN's on one of our server, put the data on it and then back it up to tape, right?

2) How I have to backup data from SAN to tape? do I have to create backup to SAN folder or not?

3) is there anyway that I can backup data directly from SAN to tape without creating LUN's on one of the servers?

I appreciate for your help regarding this matter.

↧

These files were not restored (Restore failed with error, or file/directory specified but not found in backup):

January 24, 2013, 9:32 am

≫ Next: Multiple copies of same Media after 2010 - 2012 upgrade

≪ Previous: How to connect and backup data from SAN to tape library? Please help

I need a solution

Netbackup version 7.5.0.3

NDMP restore on EMC filer

its says requested operation was successfully but nothing is restored on destination folder.

same error message appear even if I am restoring on the same location.

20:09:17 (54072.xxx) Restore job id 54072 will require 1 image.
20:09:17 (54072.xxx) Media id LS0209 is needed for the restore.
20:09:17 (54072.xxx) Media id LS0203 is needed for the restore.
20:09:17 (54072.xxx) Media id LS0204 is needed for the restore.
20:09:17 (54072.xxx) Media id LS0205 is needed for the restore.
20:09:17 (54072.xxx) Media id LS0206 is needed for the restore.
20:09:17 (54072.xxx) Media id LS0207 is needed for the restore.
20:09:17 (54072.xxx) Media id LS0208 is needed for the restore.

20:09:18 (54072.001) Restoring from copy 1 of image created 1/6/2013 7:19:14 PM
20:09:21 (54072.001) INF - If Media id LS0203 is not in a robotic library administrative interaction may be required to satisfy this mount request.
20:09:22 (54072.001) INF - Waiting for mount of media id LS0203 on server master for reading.
20:10:02 (54072.001) INF - Waiting for positioning of media id LS0203 on server master for reading.
20:10:54 (54072.001) INF - Beginning restore from server master to client xyz.
20:10:56 (54072.001) INF - Restoring NDMP files from /root_vdm_2/fs_Projectdir2/ProjectData/BU5/BH.700802.001/ to [See line below]
20:10:56 (54072.001) INF - Restoring NDMP files from [See line above] to /root_vdm_2/fs_Restore/Restore2/BU5/BH.700802.001
20:10:57 (54072.001) DAR enabled
20:10:58 (54072.001) INF - If Media id LS0206 is not in a robotic library administrative interaction may be required to satisfy this mount request.
20:12:28 (54072.001) INF - Waiting for mount of media id LS0206 on server master for reading.
20:12:56 (54072.001) INF - Waiting for positioning of media id LS0206 on server master for reading.
20:13:34 (54072.001) INF - Continuing restore from server master to client xyz.
20:14:31 (54072.001) xyz: These files were not restored (Restore failed with error, or file/directory specified but not found in backup):
20:14:31 (54072.001) xyz: /root_vdm_2/fs_Projectdir2/ProjectData/BU5/BH.700802.001/GOLD_.xls
20:14:32 (54072.001) xyz: server_archive: emctar vol 1, 0 files, 786432 bytes read, 0 bytes written
20:14:32 (54072.001) NDMP restore successful from path /root_vdm_2/fs_Projectdir2
20:14:32 (54072.001) /root_vdm_2/fs_Projectdir2/ProjectData/BU5/BH.700802.001/GOLD_.xls
20:14:33 (54072.001) Status of restore from copy 1 of image created 1/6/2013 7:19:14 PM = the requested operation was successfully completed

20:14:34 (54072.xxx) INF - Status = the requested operation was successfully

↧

Multiple copies of same Media after 2010 - 2012 upgrade

January 25, 2013, 6:00 am

≫ Next: System State failed

≪ Previous: These files were not restored (Restore failed with error, or file/directory specified but not found in backup):

I need a solution

Hi all,

So after upgrading from BE 2010 -2012 I have ended up with multiple copies of some of my tapes.

For example, I have a tape named TWS053L4. If I look at 'All media' I can see it 3 entries for it. They were in different Media Sets but I have put them all in the media set I want them to be.

One of the entries shows the location as my Robotic Library, so I believe this is the 'correct' one, but hjow can I safely get rid of the duplicate entries?

↧

System State failed

January 25, 2013, 6:21 am

≫ Next: How to speed up snapshot indexing? BE 2010 CPS

≪ Previous: Multiple copies of same Media after 2010 - 2012 upgrade

I need a solution

Hello,

After upgrading client netbackup v7.1.0.4 to 7.5.0.4 I'm facing issue with backup for XP (SP3) client. I have downgrade netbuckup client to 7.1.0.4 but the problem is still present.

The backup job details is:

25/01/2013 14:50:45 - Error bpbrm(pid=8916) from client dkla13: ERR - Unable to backup System State or Shadow Copy. Please check the state of VSS and associated Writers.INF - EXIT STATUS 69: invalid filelist specification
25/01/2013 14:50:45 - Critical bpbrm(pid=8916) unexpected termination of client dkla13
25/01/2013 14:50:45 - Info bpbrm(pid=5908) child done, status 50
25/01/2013 14:50:45 - Info bpbrm(pid=5908) sending message to media manager: STOP BACKUP dkla13_1359119259

BPBKAR log contains:

14:56:24.187: [776.2156] <2> ov_log::V_GlobalLog: ERR - bedsShadowCopyInit():DLE_FindByName() for 'Shadow?Copy?Components' Failed! (0xE00084AF:The directory or file was not found, or could not be accessed.)
14:56:24.187: [776.2156] <2> ov_log::V_GlobalLog: ERR - unable to initialize the required BEDS interface
14:56:24.187: [776.2156] <2> tar_base::V_vTarMsgW: ERR - Unable to backup System State or Shadow Copy. Please check the state of VSS and associated Writers.14:56:24.187: [776.2156] <4> tar_backup::backup_done_state: INF - number of file directives not found: 1
14:56:24.187: [776.2156] <4> tar_backup::backup_done_state: INF - number of file directives found: 2
14:56:24.187: [776.3400] <4> tar_base::keepaliveThread: INF - keepalive thread terminating (reason: WAIT_OBJECT_0)
14:56:24.187: [776.2156] <4> tar_base::stopKeepaliveThread: INF - keepalive thread has exited. (reason: WAIT_OBJECT_0)
14:56:24.203: [776.2156] <2> tar_base::V_vTarMsgW: INF - EXIT STATUS 69: invalid filelist specification
14:56:24.203: [776.2156] <4> tar_backup::backup_done_state: INF - Not waiting for server status
14:56:24.234: [776.2156] <4> dos_backup::tfs_reset: INF - Snapshot deletion start
14:56:24.234: [776.2156] <4> OVStopCmd: INF - EXIT - status = 0
14:56:24.234: [776.2156] <2> tar_base::V_Close: closing...
14:56:24.234: [776.2156] <4> dos_backup::tfs_reset: INF - Snapshot deletion start
14:56:24.312: [776.2156] <2> ov_log::V_GlobalLog: INF - BEDS_Term(): enter - InitFlags:0x00000001
14:56:24.312: [776.2156] <2> ov_log::V_GlobalLog: INF - BEDS_Term(): ubs specifics: 0x001d0000
14:56:24.312: [776.2156] <2> ov_log::V_GlobalLog: INF - BEDS_Term(): ubs specifics: 0x00240000
14:56:24.468: [776.2156] <16> dtcp_read: TCP - failure: recv socket (296) (TCP 10053: Software caused connection abort)
14:56:24.468: [776.2156] <4> OVShutdown: INF - Finished process

After that SqlServerWriter and WMI Writer are in failed(7) status on client.. Restart corresponding services change status to stable but on next backup writers are failed again.

How to solve this problem ?

Thank you.

↧

How to speed up snapshot indexing? BE 2010 CPS

January 25, 2013, 6:27 am

≫ Next: Backup errors. 0xe000846b V-79-57344-33899

≪ Previous: System State failed

I need a solution

We are running Backup Exec 2010 R3 as our backup application. We also use the Continuous Protection Server and take daily snapshots. Is there anyway to speed up the indexing of snapshots? We keep getting a warning that says "Indexing is falling behind" and when you view the snapshots a total of 5 are shown, only one of which has been indexed and it is from 6 days ago.

Also, now that I actually look at it, the other 4 snapshots all show as "Pending". It doesnt even look like its indexing any at all...

Thanks for any info you can give!

↧

Backup errors. 0xe000846b V-79-57344-33899

January 25, 2013, 7:30 am

≫ Next: ? Configure Begin Time and End time of Reoccuring Job

≪ Previous: How to speed up snapshot indexing? BE 2010 CPS

I need a solution

These are the errors I'm getting for jobs...

Job Completion Status
Job ended: Thursday, January 24, 2013 at 12:38:20 AM
Completed status: Failed
Final error: 0xe000846b - The resource could not be backed up because an error occurred while connecting to the Backup Exec for Windows Servers Remote Agent.
Make sure that the correct version of the Remote Agent is installed and running on the target computer. If the server or resource no longer exists, remove it from the selection list. Edit the selection list properties, click the View Selection Details tab, and then remove the resource.
Final error category: Resource Errors

For additional information regarding this error refer to link V-79-57344-33899

and

Errors

Backup- [be-server] Remote Agent not detected on [server].

Unable to attach to \\[be-server]\C:.

V-79-57344-33899 - The resource could not be backed up because an error occurred while connecting to the Backup Exec for Windows Servers Remote Agent.

Note: Click 'Edit Selection List...' to display the View Selection Details tab of the job's selection list. Select the entry with the server that no longer exists and click Delete to remove it.Edit Selection List...
Make sure that the correct version of the Remote Agent is installed and running on the target computer. If the server or resource no longer exists, remove it from the selection list. Edit the selection list properties, click the View Selection Details tab, and then remove the resource.

Unable to attach to \\[be-server]\D:.

V-79-57344-33899 - The resource could not be backed up because an error occurred while connecting to the Backup Exec for Windows Servers Remote Agent.

Note: Click 'Edit Selection List...' to display the View Selection Details tab of the job's selection list. Select the entry with the server that no longer exists and click Delete to remove it.Edit Selection List...
Make sure that the correct version of the Remote Agent is installed and running on the target computer. If the server or resource no longer exists, remove it from the selection list. Edit the selection list properties, click the View Selection Details tab, and then remove the resource.

It appears for each item in Job History. We use BE 2010 R3, and it is installed on a Windows 2008 R2 server. [be-server] mentioned above is the same server that BE is installed on. I've looked in the discussions and online but nothing. Not sure what else to try.

↧

? Configure Begin Time and End time of Reoccuring Job

January 25, 2013, 7:36 am

≫ Next: EXIT STATUS 6: the backup failed to back up the requested files

≪ Previous: Backup errors. 0xe000846b V-79-57344-33899

I need a solution

Hello,

We have:

BE 2012 running on Windows 2008 R2
BE 2012 RAWS + Enterprise Option
MS SQL 2008 R2 (standard) running on Windows Server 2008 R2
SANs used for master, temp, and db (size 200 GB)
FULL Backups each night - takes about 30 minutes - during 2hr time period when DB is quiet, but online.

During 22 hrs of normal business (online and global customers) we would like to take Transaction Log backups during the day. The other 2 hrs are for DB maintenance and FULL backup.

We have MS SQL STANDARD so limited in how many tasks it can do at the same time.

BE 2012 allows job schedule START time (e.g. 6:00 am) and how often job will run (e.g. every 30 minutes) but we do not see a job schedule END time.

We would like the Transaction Log backup to run during 22 hrs each day, but obviously NOT at the same time we run the FULL backup.

Questions:

How can we schedule hourly Log File backups and not run when the FULL backup is running? (or is this not really a problem)

Thank you in advance for your help.

-- Bill --

↧

EXIT STATUS 6: the backup failed to back up the requested files

January 25, 2013, 8:01 am

≫ Next: bptestbpcd

≪ Previous: ? Configure Begin Time and End time of Reoccuring Job

I need a solution

All,

I'd like some assistance in resolving an ongoing backup failure I've been encountering. I have a backup job that runs against a database that is approximately 637GB. The job runs several times a week and fails every few days, but there is no pattern to when it fails. Additionally, the job does not always fail.

In use on the client server: Microsoft SQL Server 2005 - 9.00.4060.00 (X64)

In use on the master server: NetBackup 7.5.0.4

Client Read Timeout on Master/media server: 900
Client Connect Timeout: 900

I've attached the following logs: dbclient, mssql failure log from master server, bpbrm log from master server, bptm log from master server.

-The failure occurs at 02:36 in the log from the client and 21:36 in the logs from the master server.

dbclient Log snippet:

02:36:00.119 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:00.447 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:00.728 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:00.931 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:01.150 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:01.291 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:01.541 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:01.728 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:01.978 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:01.994 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:02.291 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:02.572 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:02.822 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:03.025 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:03.150 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:03.166 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:03.556 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:03.775 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:03.853 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:03.947 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:04.010 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:04.150 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:04.166 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:04.650 [5112.2156] <4> dbc_put: INF - sending keepalive on NAME Socket

02:36:23.995 [5112.2156] <16> writeToServer: ERR - send() to server on socket failed:

02:36:23.995 [5112.2156] <16> dbc_put: ERR - failed sending data to server

02:36:23.995 [5112.2156] <4> closeApi: entering closeApi.

02:36:24.026 [5112.2156] <4> closeApi: INF - EXIT STATUS 6: the backup failed to back up the requested files

02:36:24.026 [5112.2156] <4> closeApi: INF - closing commSock 872

02:36:24.026 [5112.2156] <4> closeApi: INF - closing dataSock 900

02:36:24.026 [5112.2156] <4> closeApi: INF - setting linger on nameSock 884

02:36:24.026 [5112.2156] <4> closeApi: INF - closing nameSock 884

02:36:24.135 [5112.2156] <16> VxBSASendData: ERR - Could not do a bsa_put().

02:36:24.167 [5112.2156] <4> getOwnerName: entering getOwnerName.

02:36:24.167 [5112.2156] <4> dbc_GetServerName: entering dbc_GetServerName.

02:36:24.167 [5112.2156] <4> getServerName: entering getServerName.

02:36:24.167 [5112.2156] <4> getServerName: Read server name from nb_master_config: nb-master-02

02:36:24.167 [5112.2156] <4> dbc_GetClientName: entering dbc_GetClientName.

02:36:24.167 [5112.2156] <4> dbc_GetClientName: Returning NB client name: sapr3d01.bentley.com

02:36:24.167 [5112.2156] <4> dbc_RemoteWriteFile: NB-MASTER-02 root 37 logs/mssql_backup_failures/012513.rpt a 1

02:36:24.167 [5112.2156] <2> bprd_connect: Ignoring local_name sapr3d01.bentley.com.

02:36:24.167 [5112.2156] <2> bprd_connect: Ignoring owner_name root.

02:36:24.182 [5112.2156] <2> vnet_cached_getaddrinfo_and_update: [vnet_addrinfo.c:1556] file cache has expired NAME=nb-master-02 SVC=veritas_pbx

02:36:24.182 [5112.2156] <2> retry_getaddrinfo_for_real: [vnet_addrinfo.c:1061] getaddrinfo() failed RV=10109 NAME=NULL SVC=veritas_pbx

02:36:24.182 [5112.2156] <2> get_sig_pbx_port: [vnet_addrinfo.c:4416] RegOpenKeyEx failed STAT=2 REGISTRY=Software\VERITAS\VxPBX

02:36:24.182 [5112.2156] <2> retry_getaddrinfo: [vnet_addrinfo.c:884] using IANA SVC=veritas_pbx PORT=1556

02:36:24.182 [5112.2156] <2> retry_getaddrinfo: [vnet_addrinfo.c:910] adjusted service name 1556

02:36:24.182 [5112.2156] <2> vnet_cached_getaddrinfo_and_update: [vnet_addrinfo.c:1630] found via getaddrinfo NAME=nb-master-02 SVC=veritas_pbx

02:36:24.182 [5112.2156] <2> vnet_sortaddrs: [vnet_addrinfo.c:3945] sorted addrs: 1 0x1

02:36:24.182 [5112.2156] <2> vnet_cached_getaddrinfo_and_update: [vnet_addrinfo.c:1556] file cache has expired NAME=10.251.2.24 SVC=NULL

02:36:24.182 [5112.2156] <2> vnet_cached_getaddrinfo_and_update: [vnet_addrinfo.c:1630] found via getaddrinfo NAME=10.251.2.24 SVC=NULL

02:36:24.182 [5112.2156] <2> vnet_get_pref_netconnection: [vnet_addrinfo.c:4809] using interface ANY

02:36:24.182 [5112.2156] <2> vnet_cached_getaddrinfo_and_update: [vnet_addrinfo.c:1556] file cache has expired NAME=nb-master-02 SVC=vnetd

02:36:24.182 [5112.2156] <2> retry_getaddrinfo: [vnet_addrinfo.c:906] using SVC=vnetd PORT=13724

02:36:24.182 [5112.2156] <2> retry_getaddrinfo: [vnet_addrinfo.c:910] adjusted service name 13724

02:36:24.182 [5112.2156] <2> vnet_cached_getaddrinfo_and_update: [vnet_addrinfo.c:1630] found via getaddrinfo NAME=nb-master-02 SVC=vnetd

02:36:24.182 [5112.2156] <2> vnet_sortaddrs: [vnet_addrinfo.c:3945] sorted addrs: 1 0x1

02:36:24.182 [5112.2156] <2> vnet_get_pref_netconnection: [vnet_addrinfo.c:4809] using interface ANY

02:36:24.182 [5112.2156] <2> vnet_cached_getaddrinfo_and_update: [vnet_addrinfo.c:1556] file cache has expired NAME=nb-master-02 SVC=bprd

02:36:24.182 [5112.2156] <2> retry_getaddrinfo: [vnet_addrinfo.c:906] using SVC=bprd PORT=13720

02:36:24.182 [5112.2156] <2> retry_getaddrinfo: [vnet_addrinfo.c:910] adjusted service name 13720

02:36:24.182 [5112.2156] <2> vnet_cached_getaddrinfo_and_update: [vnet_addrinfo.c:1630] found via getaddrinfo NAME=nb-master-02 SVC=bprd

02:36:24.182 [5112.2156] <2> vnet_sortaddrs: [vnet_addrinfo.c:3945] sorted addrs: 1 0x1

02:36:24.182 [5112.2156] <2> vnet_get_pref_netconnection: [vnet_addrinfo.c:4809] using interface ANY

02:36:24.182 [5112.2156] <2> async_connect: [vnet_connect.c:1477] connect in progress 1 0x1

02:36:24.198 [5112.2156] <2> vnet_pbxConnect: pbxConnectEx Succeeded

02:36:24.198 [5112.2156] <2> do_pbx_service: [vnet_connect.c:2116] via PBX bprd CONNECT FROM 10.251.1.161.3368 TO 10.251.2.24.1556 fd = 888

02:36:24.198 [5112.2156] <2> async_connect: [vnet_connect.c:1644] connect async CONNECT FROM 10.251.1.161.3368 TO 10.251.2.24.1556 fd = 888

02:36:24.198 [5112.2156] <2> connect_to_service: connect succeeded STATUS (0) SUCCESS FROM 0.0.0.0 TO nb-master-02 10.251.2.24 bprd VIA pbx

02:36:24.198 [5112.2156] <2> logconnections: BPRD CONNECT FROM 10.251.1.161.3368 TO 10.251.2.24.1556 fd = 888

02:36:24.198 [5112.2156] <2> vnet_check_vxss_client_magic_with_info: [vnet_vxss_helper.c:843] Assuming no VxSS for DB Agents 0 0x0

02:36:24.651 [5112.2156] <16> writeToServer: ERR - send() to server on socket failed:

02:36:24.651 [5112.2156] <16> dbc_RemoteWriteFile: ERR - could not write progress status message to the NAME socket

02:36:24.651 [5112.2156] <4> dbc_RemoteWriteFile: INF - RemoteWriteFile status = 0

02:36:24.651 [5112.2156] <16> DBthreads::dbclient: ERR - Error in VxBSASendData: 1.

02:36:24.651 [5112.2156] <4> VxBSALogJobInfo: INF - entering VxBSALOgJobInfo.

02:36:24.651 [5112.2156] <4> getOwnerName: entering getOwnerName.

02:36:24.651 [5112.2156] <4> dbc_GetServerClientConfig: entering dbc_GetServerClientConfig.

02:36:24.667 [5112.2156] <4> dbc_GetServerClientConfig: ServerName: <nb-master-02>, ClientName: <sapr3d01.bentley.com>

02:36:24.667 [5112.2156] <4> VxBSAGetEnv: INF - entering GetEnv - BSA_SERVICE_HOST

02:36:24.667 [5112.2156] <4> VxBSAGetEnv: INF - returning - NB-MASTER-02

02:36:24.667 [5112.2156] <4> VxBSAGetEnv: INF - entering GetEnv - NBBSA_CLIENT_HOST

02:36:24.667 [5112.2156] <4> VxBSAGetEnv: INF - returning -

02:36:24.667 [5112.2156] <2> bprd_connect: Ignoring local_name sapr3d01.bentley.com.

02:36:24.667 [5112.2156] <2> bprd_connect: Ignoring owner_name SYSTEM.

02:36:24.667 [5112.2156] <2> vnet_sortaddrs: [vnet_addrinfo.c:3945] sorted addrs: 1 0x1

02:36:24.667 [5112.2156] <2> vnet_get_pref_netconnection: [vnet_addrinfo.c:4809] using interface ANY

02:36:24.667 [5112.2156] <2> vnet_sortaddrs: [vnet_addrinfo.c:3945] sorted addrs: 1 0x1

02:36:24.667 [5112.2156] <2> vnet_get_pref_netconnection: [vnet_addrinfo.c:4809] using interface ANY

02:36:24.667 [5112.2156] <2> vnet_sortaddrs: [vnet_addrinfo.c:3945] sorted addrs: 1 0x1

02:36:24.667 [5112.2156] <2> vnet_get_pref_netconnection: [vnet_addrinfo.c:4809] using interface ANY

02:36:24.667 [5112.2156] <2> async_connect: [vnet_connect.c:1477] connect in progress 1 0x1

02:36:24.682 [5112.2156] <2> vnet_pbxConnect: pbxConnectEx Succeeded

02:36:24.682 [5112.2156] <2> do_pbx_service: [vnet_connect.c:2116] via PBX bprd CONNECT FROM 10.251.1.161.3369 TO 10.251.2.24.1556 fd = 908

02:36:24.682 [5112.2156] <2> async_connect: [vnet_connect.c:1644] connect async CONNECT FROM 10.251.1.161.3369 TO 10.251.2.24.1556 fd = 908

02:36:24.682 [5112.2156] <2> connect_to_service: connect succeeded STATUS (0) SUCCESS FROM 0.0.0.0 TO NB-MASTER-02 10.251.2.24 bprd VIA pbx

02:36:24.682 [5112.2156] <2> logconnections: BPRD CONNECT FROM 10.251.1.161.3369 TO 10.251.2.24.1556 fd = 908

02:36:24.682 [5112.2156] <2> vnet_check_vxss_client_magic_with_info: [vnet_vxss_helper.c:843] Assuming no VxSS for DB Agents 0 0x0

02:36:24.963 [5112.2156] <1> DBthreads::dbclient: CONTINUATION: - All backup jobs have completed.

02:36:24.963 [5112.2156] <4> VxBSALogJobInfo: INF - entering VxBSALOgJobInfo.

02:36:24.963 [5112.2156] <4> getOwnerName: entering getOwnerName.

02:36:24.963 [5112.2156] <4> dbc_GetServerClientConfig: entering dbc_GetServerClientConfig.

02:36:24.963 [5112.2156] <4> dbc_GetServerClientConfig: ServerName: <nb-master-02>, ClientName: <sapr3d01.bentley.com>

02:36:24.963 [5112.2156] <4> VxBSAGetEnv: INF - entering GetEnv - BSA_SERVICE_HOST

02:36:24.963 [5112.2156] <4> VxBSAGetEnv: INF - returning - NB-MASTER-02

02:36:24.963 [5112.2156] <4> VxBSAGetEnv: INF - entering GetEnv - NBBSA_CLIENT_HOST

02:36:24.963 [5112.2156] <4> VxBSAGetEnv: INF - returning -

02:36:24.963 [5112.2156] <2> bprd_connect: Ignoring local_name sapr3d01.bentley.com.

02:36:24.963 [5112.2156] <2> bprd_connect: Ignoring owner_name SYSTEM.

02:36:24.963 [5112.2156] <2> vnet_sortaddrs: [vnet_addrinfo.c:3945] sorted addrs: 1 0x1

02:36:24.963 [5112.2156] <2> vnet_get_pref_netconnection: [vnet_addrinfo.c:4809] using interface ANY

02:36:24.963 [5112.2156] <2> vnet_sortaddrs: [vnet_addrinfo.c:3945] sorted addrs: 1 0x1

02:36:24.963 [5112.2156] <2> vnet_get_pref_netconnection: [vnet_addrinfo.c:4809] using interface ANY

02:36:24.963 [5112.2156] <2> vnet_sortaddrs: [vnet_addrinfo.c:3945] sorted addrs: 1 0x1

02:36:24.963 [5112.2156] <2> vnet_get_pref_netconnection: [vnet_addrinfo.c:4809] using interface ANY

02:36:24.963 [5112.2156] <2> async_connect: [vnet_connect.c:1477] connect in progress 1 0x1

02:36:24.979 [5112.2156] <2> vnet_pbxConnect: pbxConnectEx Succeeded

02:36:24.979 [5112.2156] <2> do_pbx_service: [vnet_connect.c:2116] via PBX bprd CONNECT FROM 10.251.1.161.3370 TO 10.251.2.24.1556 fd = 908

02:36:24.979 [5112.2156] <2> async_connect: [vnet_connect.c:1644] connect async CONNECT FROM 10.251.1.161.3370 TO 10.251.2.24.1556 fd = 908

02:36:24.979 [5112.2156] <2> connect_to_service: connect succeeded STATUS (0) SUCCESS FROM 0.0.0.0 TO NB-MASTER-02 10.251.2.24 bprd VIA pbx

02:36:24.979 [5112.2156] <2> logconnections: BPRD CONNECT FROM 10.251.1.161.3370 TO 10.251.2.24.1556 fd = 908

02:36:24.979 [5112.2156] <2> vnet_check_vxss_client_magic_with_info: [vnet_vxss_helper.c:843] Assuming no VxSS for DB Agents 0 0x0

02:36:26.057 [5112.2156] <4> VxBSAEndTxn: INF - entering VxBSAEndTxn.

02:36:26.057 [5112.2156] <4> VxBSAEndTxn: INF - Transaction being ABORTED.

02:36:26.057 [5112.2156] <4> VxBSAGetEnv: INF - entering GetEnv - NBBSA_LOG_DIRECTORY

02:36:26.057 [5112.2156] <4> VxBSAGetEnv: INF - returning - DBCLIENT

02:36:26.057 [5112.2156] <4> VxBSAEndTxn: INF - Cleaning directory: <C:\Program Files\Veritas\NetBackup\Logs\DBCLIENT>

02:36:26.057 [5112.2156] <4> delete_old_files: entering delete_old_files.

02:36:26.057 [5112.2156] <8> close_image: Session being terminated abnormally, cleaning up

02:36:26.057 [5112.2156] <4> closeApi: entering closeApi.

02:36:26.057 [5112.2156] <4> closeApi: INF - EXIT STATUS 6: the backup failed to back up the requested files

02:36:26.057 [5112.2156] <4> close_image: INF - backup FAILED

02:36:26.057 [5112.2156] <4> close_image: INF ---- end of Backup ---

-----------

Thanks in advance!

↧

bptestbpcd

January 25, 2013, 8:43 am

≫ Next: Cannot BACKUP or RESTORE a database snapshot.

≪ Previous: EXIT STATUS 6: the backup failed to back up the requested files

I need a solution

# bptestbpcd -host fred -connect_options 0 0 2
0 0 2
10.0.0.32:748 -> 10.0.0.59:13782
10.0.0.32:983 <- 10.0.0.59:635

Example 2 - A connection from the server fred is tried to the client wilma by using the vnetd port number if possible:

# bptestbpcd -M fred -client wilma -connect_options 2 2 0 1 1 1
10.0.0.59:40983 -> 10.0.0.104:13724
10.0.0.59:40984 -> 10.0.0.104:13724
10.0.0.59:40985 -> 10.0.0.104:13724

This command will make connections to client on the vnetd port instead of pbx?

And from next time backup will use vnetd port to connect to client?

NBU 7.1

↧

Cannot BACKUP or RESTORE a database snapshot.

January 25, 2013, 8:48 am

≫ Next: Migrating DLO server from Windows 2003 to Windows 2008

≪ Previous: bptestbpcd

I need a solution

SQL Server 2008 backups. Backing up multiple databases in a single batch. Most of them succeed. Failures have the error message from the subject (full error for a single DB below.) I found an article that pertains to NBU 6.5 but no solution offered. I was looking at the DB properties, but nothign really jumped out at me.

NBU SQL client connets with sa. Services run as Local System.

1/24/2013 10:22:19 PM - Info dbclient(pid=14720) INF - BACKUP STARTED USING
1/24/2013 10:22:19 PM - Info dbclient(pid=14720) Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
1/24/2013 10:22:19 PM - Info dbclient(pid=14720) Jun 17 2011 00:54:03
1/24/2013 10:22:19 PM - Info dbclient(pid=14720) Copyright (c) Microsoft Corporation
1/24/2013 10:22:19 PM - Info dbclient(pid=14720) Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
1/24/2013 10:22:19 PM - Info dbclient(pid=14720) Batch = C:\Program Files\Veritas\NetBackup\DbExt\MsSql\EU-SQL-05_DIFF.bch, Op# = 10
1/24/2013 10:22:19 PM - Info dbclient(pid=14720) INF - Using backup image EU-SQL-01b.MSSQL7.EU-SQL-05\SODA.inc.SODA_PROD_Authentication_MIS_ss.~.7.001of001.20130125032218..C
1/24/2013 10:22:20 PM - Info dbclient(pid=14720) INF - backup database "SODA_PROD_Authentication_MIS_ss" to VIRTUAL_DEVICE='VNBU0-14720-18172-1359084139' with stats = 10, blocksize = 65536, maxtransfersize = 4194304, buffercount = 2, differential
1/24/2013 10:22:21 PM - Info dbclient(pid=14720) INF - Number of stripes: 1, Number of buffers per stripe 2.
1/24/2013 10:22:21 PM - Info dbclient(pid=14720) INF - Created VDI object for SQL Server instance <SODA>. Connection timeout is <300> seconds.
1/24/2013 10:25:10 PM - Info dbclient(pid=5224) INF - ODBC return code <2>, SQL State <01000>, SQL Message <3211><[Microsoft][ODBC SQL Server Driver][SQL Server]10 percent processed.>.
1/24/2013 10:27:21 PM - Info dbclient(pid=14720) ERR - Error in GetConfiguration: 0x80770003.
1/24/2013 10:27:22 PM - Info dbclient(pid=14720)     CONTINUATION: - The api was waiting and the timeout interval had elapsed.
1/24/2013 10:27:22 PM - Info dbclient(pid=14720) DBMS MSG - ODBC return code <-1>, SQL State <37000>, SQL Message <3002><[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot BACKUP or RESTORE a database snapshot.>.
1/24/2013 10:27:23 PM - Info dbclient(pid=14720) DBMS MSG - SQL Message <3013><[Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE is terminating abnormally.>
1/24/2013 10:27:23 PM - Info dbclient(pid=14720) ERR - Error found executing <backup database "SODA_PROD_Authentication_MIS_ss" to VIRTUAL_DEVICE='VNBU0-14720-18172-1359084139' with stats = 10, blocksize = 65536, maxtransfersize = 4194304, buffercount = 2, differential>.
1/24/2013 10:27:27 PM - Info dbclient(pid=14720) ERR - Error in VDS->Close: 0x80770004.
1/24/2013 10:27:28 PM - Info dbclient(pid=14720)     CONTINUATION: - An abort request is preventing anything except termination actions.
1/24/2013 10:27:28 PM - Info dbclient(pid=14720) INF - OPERATION #10 of batch C:\Program Files\Veritas\NetBackup\DbExt\MsSql\EU-SQL-05_DIFF.bch FAILED with STATUS 1 (0 is normal). Elapsed time = 310(310) seconds.

↧

Migrating DLO server from Windows 2003 to Windows 2008

January 25, 2013, 9:01 am

≫ Next: How to find B2D files relating to backup set?

≪ Previous: Cannot BACKUP or RESTORE a database snapshot.

I need a solution

Hi,

I must migrate our DLO servers 6.1 (windows 2003+SQL 2005) to a new platform that will be Windows 2008 R2 with SQL 2008R2 and DLO 7.0.

We have near 1000 users on one DLO server, and 500 users on the second server.

Is where a best practice for this operation ?

My idea was to install two new 2008 servers with SQL 2008 R2 first.

Update the old DLO 6.1 servers to 7.0 in order to have the same version.

Import the database of the old servers with:

> DLODBUtils -backup

Remove the old server, insert the new server in AD, change the servername (in order two have the same name as before).

use >DLODBUtils -restore, in order to restore all the configuration of DLO in the new server.

Please give me your point of view about this process.

Thanks.

Ismail.

↧

How to find B2D files relating to backup set?

January 25, 2013, 9:19 am

≫ Next: OU Restotre fails

≪ Previous: Migrating DLO server from Windows 2003 to Windows 2008

I need a solution

Hi,

I added a file server yesterday to my BE 2012 server and created a backup job. There is about 7GB of data in the file share and BE reported a succesful job and stated that it backed up all the data. However, I cannot for the life of me find the file. There is only ONE file in the storage repo that I pointed the job to but it is only 88MB! Where is the REAL B2D file?

When I click on "backup sets" and then double-click the set it created last night there is no where (that I can find) that shows which B2D files are associated with the set. Why?

Thanks!

↧

OU Restotre fails

January 25, 2013, 1:21 pm

≫ Next: SDR and DR files

≪ Previous: How to find B2D files relating to backup set?

I need a solution

HI Everyone,

Trying to restore a OU from backup , unable to restore it it fails stating the member group has to be failed with i need to restore it as a different job done it and successful hoiwever comes with exception and got to do a password reset i cant do this all 50 OU'S

Product : Backupexec 2012

Any help much appreciated

↧

SDR and DR files

January 25, 2013, 3:10 pm

≫ Next: subfolders under the BEData folder

≪ Previous: OU Restotre fails

I need a solution

Can you use .DR files created from previous backup sets when you do an SDR recovery?

For example, if you are restoring Wednesday's backup, can you use an SDR file that was created Tuesday?

I'm asking because it seems the .DR file is created after the backup is run, and therefore not backed up until the following job.

↧

subfolders under the BEData folder

January 25, 2013, 3:40 pm

≫ Next: Backing up Hyper-V VM's

≪ Previous: SDR and DR files

I need a solution

Can you have subfolders under the BEData folder? I would like to create subfolders under this folder and label the folders for each server that I'm backing up and directing the backup for that particualar server to it's respective folder name. Or are all the backup files stored in the BEData folder only? Such as: X:\BEData\ServerA and all of Server A's backup stored in this folder X:\BEData\ServerB and all of Server B's backup stored in this folder X:\BEData\ServerC and all of Server C's backup stored in this folder

8255191

↧

Backing up Hyper-V VM's

January 25, 2013, 5:15 pm

≫ Next: Download issue from fileconnect.symantec.com

≪ Previous: subfolders under the BEData folder

I need a solution

My larger challenge will be getting from 11d to Continous Protection for Hyper-V.

Can anyone chime in on how they backup their SQL/Exchange (any DB) VM's. Do you just backup VHD's; or do you actually perform application aware backups of the databases from Symantec Backup Exec?

Looking for strategies....

8254191

↧

Download issue from fileconnect.symantec.com

January 25, 2013, 10:03 pm

≫ Next: backup failing

≪ Previous: Backing up Hyper-V VM's

I need a solution

Hey! Using IE9 , Chrome (on Windows 7) or Firefox I am unable to download files for Netbackup 7.1 from fileconnect.symantec.com

What happens - I enter the site , enter the serial number , choose the language , choose HTTP download , check the desired download (whatever) and click the "begin download" button and then after some downloading it showing " Unknown error" and downloading is cancelled .

I tried with Download manager also. After downloanding 55% , it is asking username and password . Here , I attached the screenshots. Please find the attachments. I tried with my authorised licensing symantec registered username and password. But still problem is not solved.

Any help or advise is greatly appreciated!

symantec.jpg

↧

backup failing

January 25, 2013, 10:18 pm

≫ Next: NetBackup 6.5 Restore Stalled

≪ Previous: Download issue from fileconnect.symantec.com

I need a solution

<2>bptestbpcd: server not allowed access

00:11:53.984 [32035] <2> bptestbpcd: server not allowed access

<2>bptestbpcd: EXIT status = 46

00:11:53.984 [32035] <2> bptestbpcd: EXIT status = 46

server not allowed access

Below are the client bpcd logs

23:33:39.868 [2308.1388] <2> setup_debug_log: switched debug log file for bpcd

23:33:39.868 [2308.1388] <2> bpcd main: VERBOSE = 0

23:33:39.868 [2308.1388] <2> logparams: C:\Program Files\Veritas\NetBackup\bin\bpcd.exe -standalone

23:33:39.868 [2308.1388] <2> process_requests: offset to GMT 21600

23:33:39.868 [2308.1388] <2> logconnections: BPCD ACCEPT FROM 13.245.32.15.60920 TO 13.245.32.97.1556 fd = 380

23:33:39.868 [2308.1388] <2> process_requests: setup_sockopts complete

23:33:44.384 [2308.1388] <2> retry_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1099: 0: getnameinfo() failed: 11004 0x00002afc

23:33:44.384 [2308.1388] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1833: 0: retry_getnameinfo() failed: 11004 0x00002afc

23:33:44.384 [2308.1388] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1834: 0: retry_getnameinfo() failed ipstr: 13.245.32.15

23:33:44.384 [2308.1388] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1835: 0: retry_getnameinfo() failed port: 60920 0x0000edf8

23:33:44.384 [2308.1388] <2> bpcd peer_hostname: vnet_cached_getnameinfo() failed: 6 11004

23:33:44.384 [2308.1388] <2> bpcd peer_hostname: Connection from host 13.245.32.15 (13.245.32.15) port 60920

23:33:44.384 [2308.1388] <2> bpcd valid_server: comparing lx002 and 13.245.32.15

23:33:44.384 [2308.1388] <4> bpcd valid_server: 13.245.32.15 is not a master server

23:33:44.384 [2308.1388] <16> bpcd valid_server: 13.245.32.15 is not a media server either

23:33:44.384 [2308.1388] <2> process_requests: output socket port number = 1

23:33:44.384 [2308.1388] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1527: 0: in failed file cache: 10109 0x0000277d

23:33:44.384 [2308.1388] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1528: 0: in failed file cache name: NULL

23:33:44.384 [2308.1388] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1529: 0: in failed file cache service: testdaemon

23:33:44.384 [2308.1388] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2485: 0: vnet_cached_getaddrinfo failed: 6 0x00000006

23:33:44.384 [2308.1388] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2486: 0: vnet_cached_getaddrinfo failed ret: 10109 0x0000277d

23:33:44.384 [2308.1388] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2487: 0: vnet_cached_getaddrinfo failed service: testdaemon

23:33:44.384 [2308.1388] <2> is_pbxable_server: ../../libvlibs/vnet_connect.c.1827: 0: vnet_cached_get_service_port() failed: 6 0x00000006

23:33:44.384 [2308.1388] <2> is_pbxable_server: ../../libvlibs/vnet_connect.c.1828: 0: service: 1340

23:33:44.384 [2308.1388] <2> file_to_addrinfo: ../../libvlibs/vnet_addrinfo.c.6646: 0: fopen() failed: 2 0x00000002

23:33:44.384 [2308.1388] <2> file_to_addrinfo: ../../libvlibs/vnet_addrinfo.c.6647: 0: fopen() failed: C:\Program Files\Veritas\NetBackup\var\host_cache\14f\6cf9fd4f+1340,1,0,2,1,0+127.0.0.1.txt

23:33:44.462 [2308.1388] <2> process_requests: Duplicated vnetd socket on stderr

23:33:44.462 [2308.1388] <2> process_requests: <---- NetBackup 7.1 0 ------------initiated

23:33:44.462 [2308.1388] <2> process_requests: VERBOSE = 0

23:33:44.462 [2308.1388] <2> bpcd exit_bpcd: exit status 46 ----------->exiting

23:33:44.462 [2308.1388] <4> bpcd exit_bpcd: FTL - BPCD EXIT STATUS 46

23:33:44.462 [2308.1388] <16> process_requests: Server access denied

23:35:58.992 [352.1788] <2> setup_debug_log: switched debug log file for bpcd

23:35:58.992 [352.1788] <2> bpcd main: VERBOSE = 0

23:35:58.992 [352.1788] <2> logparams: C:\Program Files\Veritas\NetBackup\bin\bpcd.exe -standalone

23:35:58.992 [352.1788] <2> process_requests: offset to GMT 21600

23:35:58.992 [352.1788] <2> logconnections: BPCD ACCEPT FROM 13.245.32.15.59336 TO 13.245.32.97.1556 fd = 380

23:35:58.992 [352.1788] <2> process_requests: setup_sockopts complete

23:36:03.492 [352.1788] <2> retry_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1099: 0: getnameinfo() failed: 11004 0x00002afc

23:36:03.492 [352.1788] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1833: 0: retry_getnameinfo() failed: 11004 0x00002afc

23:36:03.492 [352.1788] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1834: 0: retry_getnameinfo() failed ipstr: 13.245.32.15

23:36:03.492 [352.1788] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1835: 0: retry_getnameinfo() failed port: 59336 0x0000e7c8

23:36:03.492 [352.1788] <2> bpcd peer_hostname: vnet_cached_getnameinfo() failed: 6 11004

23:36:03.492 [352.1788] <2> bpcd peer_hostname: Connection from host 13.245.32.15 (13.245.32.15) port 59336

23:36:03.492 [352.1788] <2> bpcd valid_server: comparing lx002 and 13.245.32.15

23:36:03.492 [352.1788] <4> bpcd valid_server: 13.245.32.15 is not a master server

23:36:03.492 [352.1788] <16> bpcd valid_server: 13.245.32.15 is not a media server either

23:36:03.492 [352.1788] <2> process_requests: output socket port number = 1

23:36:03.492 [352.1788] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1527: 0: in failed file cache: 10109 0x0000277d

23:36:03.492 [352.1788] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1528: 0: in failed file cache name: NULL

23:36:03.492 [352.1788] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1529: 0: in failed file cache service: testdaemon

23:36:03.492 [352.1788] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2485: 0: vnet_cached_getaddrinfo failed: 6 0x00000006

23:36:03.492 [352.1788] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2486: 0: vnet_cached_getaddrinfo failed ret: 10109 0x0000277d

23:36:03.492 [352.1788] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2487: 0: vnet_cached_getaddrinfo failed service: testdaemon

23:36:03.492 [352.1788] <2> is_pbxable_server: ../../libvlibs/vnet_connect.c.1827: 0: vnet_cached_get_service_port() failed: 6 0x00000006

23:36:03.492 [352.1788] <2> is_pbxable_server: ../../libvlibs/vnet_connect.c.1828: 0: service: 1343

23:36:03.492 [352.1788] <2> file_to_addrinfo: ../../libvlibs/vnet_addrinfo.c.6646: 0: fopen() failed: 2 0x00000002

23:36:03.492 [352.1788] <2> file_to_addrinfo: ../../libvlibs/vnet_addrinfo.c.6647: 0: fopen() failed: C:\Program Files\Veritas\NetBackup\var\host_cache\14f\6cf9fd4f+1343,1,0,2,1,0+127.0.0.1.txt

23:36:03.570 [352.1788] <2> process_requests: Duplicated vnetd socket on stderr

23:36:03.570 [352.1788] <2> process_requests: <---- NetBackup 7.1 0 ------------initiated

23:36:03.570 [352.1788] <2> process_requests: VERBOSE = 0

23:36:03.570 [352.1788] <2> bpcd exit_bpcd: exit status 46 ----------->exiting

23:36:03.570 [352.1788] <4> bpcd exit_bpcd: FTL - BPCD EXIT STATUS 46

23:36:03.570 [352.1788] <16> process_requests: Server access denied

23:37:18.397 [3948.2536] <2> setup_debug_log: switched debug log file for bpcd

23:37:18.397 [3948.2536] <2> bpcd main: VERBOSE = 0

23:37:18.397 [3948.2536] <2> logparams: C:\Program Files\Veritas\NetBackup\bin\bpcd.exe -standalone

23:37:18.397 [3948.2536] <2> process_requests: offset to GMT 21600

23:37:18.413 [3948.2536] <2> logconnections: BPCD ACCEPT FROM 13.245.32.15.52237 TO 13.245.32.97.1556 fd = 380

23:37:18.413 [3948.2536] <2> process_requests: setup_sockopts complete

23:37:22.928 [3948.2536] <2> retry_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1099: 0: getnameinfo() failed: 11004 0x00002afc

23:37:22.928 [3948.2536] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1833: 0: retry_getnameinfo() failed: 11004 0x00002afc

23:37:22.928 [3948.2536] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1834: 0: retry_getnameinfo() failed ipstr: 13.245.32.15

23:37:22.928 [3948.2536] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1835: 0: retry_getnameinfo() failed port: 52237 0x0000cc0d

23:37:22.928 [3948.2536] <2> bpcd peer_hostname: vnet_cached_getnameinfo() failed: 6 11004

23:37:22.928 [3948.2536] <2> bpcd peer_hostname: Connection from host 13.245.32.15 (13.245.32.15) port 52237

23:37:22.928 [3948.2536] <2> bpcd valid_server: comparing lx002 and 13.245.32.15

23:37:22.928 [3948.2536] <4> bpcd valid_server: 13.245.32.15 is not a master server

23:37:22.928 [3948.2536] <16> bpcd valid_server: 13.245.32.15 is not a media server either

23:37:22.928 [3948.2536] <2> process_requests: output socket port number = 1

23:37:22.944 [3948.2536] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1527: 0: in failed file cache: 10109 0x0000277d

23:37:22.944 [3948.2536] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1528: 0: in failed file cache name: NULL

23:37:22.944 [3948.2536] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1529: 0: in failed file cache service: testdaemon

23:37:22.944 [3948.2536] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2485: 0: vnet_cached_getaddrinfo failed: 6 0x00000006

23:37:22.944 [3948.2536] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2486: 0: vnet_cached_getaddrinfo failed ret: 10109 0x0000277d

23:37:22.944 [3948.2536] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2487: 0: vnet_cached_getaddrinfo failed service: testdaemon

23:37:22.944 [3948.2536] <2> is_pbxable_server: ../../libvlibs/vnet_connect.c.1827: 0: vnet_cached_get_service_port() failed: 6 0x00000006

23:37:22.944 [3948.2536] <2> is_pbxable_server: ../../libvlibs/vnet_connect.c.1828: 0: service: 1345

23:37:22.944 [3948.2536] <2> file_to_addrinfo: ../../libvlibs/vnet_addrinfo.c.6646: 0: fopen() failed: 2 0x00000002

23:37:22.944 [3948.2536] <2> file_to_addrinfo: ../../libvlibs/vnet_addrinfo.c.6647: 0: fopen() failed: C:\Program Files\Veritas\NetBackup\var\host_cache\14f\6cf9fd4f+1345,1,0,2,1,0+127.0.0.1.txt

23:37:23.006 [3948.2536] <2> process_requests: Duplicated vnetd socket on stderr

23:37:23.006 [3948.2536] <2> process_requests: <---- NetBackup 7.1 0 ------------initiated

23:37:23.006 [3948.2536] <2> process_requests: VERBOSE = 0

23:37:23.006 [3948.2536] <2> bpcd exit_bpcd: exit status 46 ----------->exiting

23:37:23.006 [3948.2536] <4> bpcd exit_bpcd: FTL - BPCD EXIT STATUS 46

23:37:23.022 [3948.2536] <16> process_requests: Server access denied

23:37:34.756 [3184.2436] <2> setup_debug_log: switched debug log file for bpcd

23:37:34.756 [3184.2436] <2> bpcd main: VERBOSE = 0

23:37:34.756 [3184.2436] <2> logparams: C:\Program Files\Veritas\NetBackup\bin\bpcd.exe -standalone

23:37:34.756 [3184.2436] <2> process_requests: offset to GMT 21600

23:37:34.756 [3184.2436] <2> logconnections: BPCD ACCEPT FROM 13.245.32.15.54308 TO 13.245.32.97.1556 fd = 380

23:37:34.756 [3184.2436] <2> process_requests: setup_sockopts complete

23:37:39.272 [3184.2436] <2> retry_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1099: 0: getnameinfo() failed: 11004 0x00002afc

23:37:39.272 [3184.2436] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1833: 0: retry_getnameinfo() failed: 11004 0x00002afc

23:37:39.272 [3184.2436] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1834: 0: retry_getnameinfo() failed ipstr: 13.245.32.15

23:37:39.272 [3184.2436] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1835: 0: retry_getnameinfo() failed port: 54308 0x0000d424

23:37:39.272 [3184.2436] <2> bpcd peer_hostname: vnet_cached_getnameinfo() failed: 6 11004

23:37:39.272 [3184.2436] <2> bpcd peer_hostname: Connection from host 13.245.32.15 (13.245.32.15) port 54308

23:37:39.272 [3184.2436] <2> bpcd valid_server: comparing lx002 and 13.245.32.15

23:37:39.272 [3184.2436] <4> bpcd valid_server: 13.245.32.15 is not a master server

23:37:39.272 [3184.2436] <16> bpcd valid_server: 13.245.32.15 is not a media server either

23:37:39.272 [3184.2436] <2> process_requests: output socket port number = 1

23:37:39.287 [3184.2436] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1527: 0: in failed file cache: 10109 0x0000277d

23:37:39.287 [3184.2436] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1528: 0: in failed file cache name: NULL

23:37:39.287 [3184.2436] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1529: 0: in failed file cache service: testdaemon

23:37:39.287 [3184.2436] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2485: 0: vnet_cached_getaddrinfo failed: 6 0x00000006

23:37:39.287 [3184.2436] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2486: 0: vnet_cached_getaddrinfo failed ret: 10109 0x0000277d

23:37:39.287 [3184.2436] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2487: 0: vnet_cached_getaddrinfo failed service: testdaemon

23:37:39.287 [3184.2436] <2> is_pbxable_server: ../../libvlibs/vnet_connect.c.1827: 0: vnet_cached_get_service_port() failed: 6 0x00000006

23:37:39.287 [3184.2436] <2> is_pbxable_server: ../../libvlibs/vnet_connect.c.1828: 0: service: 1347

23:37:39.287 [3184.2436] <2> file_to_addrinfo: ../../libvlibs/vnet_addrinfo.c.6646: 0: fopen() failed: 2 0x00000002

23:37:39.287 [3184.2436] <2> file_to_addrinfo: ../../libvlibs/vnet_addrinfo.c.6647: 0: fopen() failed: C:\Program Files\Veritas\NetBackup\var\host_cache\14f\6cf9fd4f+1347,1,0,2,1,0+127.0.0.1.txt

23:37:39.350 [3184.2436] <2> process_requests: Duplicated vnetd socket on stderr

23:37:39.350 [3184.2436] <2> process_requests: <---- NetBackup 7.1 0 ------------initiated

23:37:39.350 [3184.2436] <2> process_requests: VERBOSE = 0

23:37:39.350 [3184.2436] <2> bpcd exit_bpcd: exit status 46 ----------->exiting

23:37:39.350 [3184.2436] <4> bpcd exit_bpcd: FTL - BPCD EXIT STATUS 46

23:37:39.350 [3184.2436] <16> process_requests: Server access denied

23:41:07.239 [2856.3752] <2> setup_debug_log: switched debug log file for bpcd

23:41:07.239 [2856.3752] <2> bpcd main: VERBOSE = 0

23:41:07.239 [2856.3752] <2> logparams: C:\Program Files\Veritas\NetBackup\bin\bpcd.exe -standalone

23:41:07.239 [2856.3752] <2> process_requests: offset to GMT 21600

23:41:07.239 [2856.3752] <2> logconnections: BPCD ACCEPT FROM 13.245.32.15.48442 TO 13.245.32.97.1556 fd = 380

23:41:07.239 [2856.3752] <2> process_requests: setup_sockopts complete

23:41:11.755 [2856.3752] <2> retry_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1099: 0: getnameinfo() failed: 11004 0x00002afc

23:41:11.755 [2856.3752] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1833: 0: retry_getnameinfo() failed: 11004 0x00002afc

23:41:11.755 [2856.3752] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1834: 0: retry_getnameinfo() failed ipstr: 13.245.32.15

23:41:11.755 [2856.3752] <2> vnet_cached_getnameinfo: ../../libvlibs/vnet_addrinfo.c.1835: 0: retry_getnameinfo() failed port: 48442 0x0000bd3a

23:41:11.755 [2856.3752] <2> bpcd peer_hostname: vnet_cached_getnameinfo() failed: 6 11004

23:41:11.755 [2856.3752] <2> bpcd peer_hostname: Connection from host 13.245.32.15 (13.245.32.15) port 48442

23:41:11.755 [2856.3752] <2> bpcd valid_server: comparing lx002 and 13.245.32.15

23:41:11.755 [2856.3752] <4> bpcd valid_server: 13.245.32.15 is not a master server

23:41:11.755 [2856.3752] <16> bpcd valid_server: 13.245.32.15 is not a media server either

23:41:11.755 [2856.3752] <2> process_requests: output socket port number = 1

23:41:11.770 [2856.3752] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1527: 0: in failed file cache: 10109 0x0000277d

23:41:11.770 [2856.3752] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1528: 0: in failed file cache name: NULL

23:41:11.770 [2856.3752] <2> vnet_cached_getaddrinfo_and_update: ../../libvlibs/vnet_addrinfo.c.1529: 0: in failed file cache service: testdaemon

23:41:11.770 [2856.3752] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2485: 0: vnet_cached_getaddrinfo failed: 6 0x00000006

23:41:11.770 [2856.3752] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2486: 0: vnet_cached_getaddrinfo failed ret: 10109 0x0000277d

23:41:11.770 [2856.3752] <2> vnet_cached_get_service_port: ../../libvlibs/vnet_addrinfo.c.2487: 0: vnet_cached_getaddrinfo failed service: testdaemon

23:41:11.770 [2856.3752] <2> is_pbxable_server: ../../libvlibs/vnet_connect.c.1827: 0: vnet_cached_get_service_port() failed: 6 0x00000006

23:41:11.770 [2856.3752] <2> is_pbxable_server: ../../libvlibs/vnet_connect.c.1828: 0: service: 1355

23:41:11.770 [2856.3752] <2> file_to_addrinfo: ../../libvlibs/vnet_addrinfo.c.6646: 0: fopen() failed: 2 0x00000002

23:41:11.770 [2856.3752] <2> file_to_addrinfo: ../../libvlibs/vnet_addrinfo.c.6647: 0: fopen() failed: C:\Program Files\Veritas\NetBackup\var\host_cache\14f\6cf9fd4f+1355,1,0,2,1,0+127.0.0.1.txt

23:41:11.833 [2856.3752] <2> process_requests: Duplicated vnetd socket on stderr

23:41:11.833 [2856.3752] <2> process_requests: <---- NetBackup 7.1 0 ------------initiated

23:41:11.833 [2856.3752] <2> process_requests: VERBOSE = 0

23:41:11.833 [2856.3752] <2> bpcd exit_bpcd: exit status 46 ----------->exiting

23:41:11.833 [2856.3752] <4> bpcd exit_bpcd: FTL - BPCD EXIT STATUS 46

23:41:11.848 [2856.3752] <16> process_requests: Server access denied

C:\Program Files\VERITAS\NetBackup\bin>bpclntcmd -pn

expecting response from server lx002

lx001 *NULL* 13.245.60.192 1415

I have entry of the client in my policy on master server

↧

NetBackup 6.5 Restore Stalled

January 26, 2013, 2:42 am

≫ Next: SharePoint Backup Strategies

≪ Previous: backup failing

I need a solution

Hello,

I'm trying to run a restore from two tapes. The first tape completes the portion of the restore and then NetBackup loads the second tape and the status says "begin reading" and then nothing happens. It looks like it's just got stuck. Hopefully someone has some ideas as I really need to restore this data.

Thanks,

Ben

↧

SharePoint Backup Strategies

January 26, 2013, 4:34 am

≫ Next: Server does not have recent updates ....

≪ Previous: NetBackup 6.5 Restore Stalled

I need a solution

Hello friends

we have moss 2k10 farm (upgraded from 2k7)

2 frnt end (NLB)

2 back end (clustered)

from central admin console we are able to back up whole farm, but on disk only. (with grt , thanx to microsoft for adding these features in shaepoint)

with NBU when initially our backups was configurd it only showed databases......

we do have workflows enabled in shrepoint for internal review, approve and reject functions based on requests. wht if my site goes down will NBU ensure is it completely safe with DB backups only

as with Backpu archive restore console doesn't show anything other than that

is it possible to restore only workflows wid NBU???????

or we need to change our backup strategies.... wht is best ????

↧